Beretta Machine Guns - The Beretta ARX160 is an Italian modular assault rifle manufactured by Beretta. Developed for the Italian Armed Forces as part of the Soldato Futuro (English: "Soldier of the Future") programme, the ARX160 was launched in 2008 as a commercial weapon system independent of the Soldato Futuro range, equipped with a single-shot 40x46mm cartridge. NATO low-velocity launcher called the GLX160 which can be mounted under a rifle or used with a proprietary stock system as a stand-alone weapon.
The Beretta ARX160 was launched in 2008 as a commercial weapon system and was developed for the Italian Armed Forces as part of the multi-tiered Soldato Futuro (Soldier of the Future) programme. The current program aims to replace the aging Beretta AR70/90 as the standard assault rifle for the Italian Armed Forces.
Beretta Machine Guns
The project began as an evolution of the Beretta AR 70/90 and Beretta SC 70/90 and was originally presented as a simple build material update and addition of minor changes to the Beretta AR 70/90. A more advanced prototype was introduced later, which included a non-collapsible but height-adjustable stock and cocking lever in the upper forward position, a feature, however, that was inconvenient to use. Further development led to the final version of the ARX-160, which is now in production and has replaced all three versions of its predecessor, the AR 70/90.
Mg Beretta M12 Full Auto
The Italian Army ordered an initial batch of 800 weapons in 2008 for field trials in Afghanistan, followed by orders for 11,500 in 2010 and 10,000 in 2012. Between 2008 and 2014, there were about 30,000 ARX160 A2s. Which is chambered in 5.56×45mm NATO cartridges supplied to the Italian Army, Italian Navy, Italian Air Force and Italian Special Forces.
In the same year, Beretta also introduced the ARX160 A2, which is now used by the Italian Army and Special Forces.
In 2013, Beretta introduced the ARX160 A3, which is an improved version of the ARX160. Improvements include a redesigned grip with improved heat dissipation and an extended Picatinny rail on the underside, as well as an improved pistol grip design.
In 2014, the Italian Ministry of Defense awarded Beretta $2.7 million to develop the ARX200 assault rifle. The Italian Armed Forces also announced the potential need for 1,170 rifles chambered for the 7.62×51mm NATO cartridge.
Italian Beretta Model 38/42 Sub Machine Gun With Replaced Non Firing Receiver
At the end of 2015, the Beretta ARX200 assault rifle was presented, which was supplied to the Italian army. It is a distant derivative of the standard ARX160 assault rifle. Passed the following military and environmental tests; Low and high temperature, temperature and humidity, ice, salt fog, heavy rain, salt water, sand and dust, mud, non-lubricated, double power resistance and trunk obstruction protection.
The Beretta ARX160 was one of five competitors for Phase II of the U.S. Army's Single Carbine Competition to Replace the M4 Carbine.
In February 2013, the Army of Argentina received an ARX160 rifle and a GLX160-class launcher for its special forces evaluation.
In December 2016, state-owned arms manufacturer Argtine Fabricaciones Militares signed an agreement with Beretta to manufacture the ARX200 under license.
Beretta's M12 Submachine Gun Has Stood The Test Of Time
The ARX160 A3 was one of 5 finalists for the French Army to replace FAMAS, eventually defeating the German HK416.
In January 2019, the Romanian Armed Forces chose the ARX160 A3 to replace the outdated PM Md.1963 (7,62x39 mm) and PM Md.1986 (5,45x39mm) for the Romanian Land Forces. Production is scheduled to begin in the fall of 2019 at Uzina Plopi ROMARM.
The ARX160 features a Qioptiq VIPIR thermal sight and GLX160 trigger, with shutter in the full rear position
The Beretta ARX160 differs from the previously released AR70/90 in several ways. It consists of an upper and lower receiver, both of which are primarily made of polymer, and operate via a short-stroke piston system. It is chambered in 5.56 x 45mm NATO or 7.62 x 39mm. Feeding is via STANAG magazines for the 5.56×45mm NATO configuration and AK-47 or AKM magazines for the 7.62×39mm configuration. Other calibers are planned, including 5.45×39mm and 6.8mm Remington SPC.
Beretta 12s Smg Italy 9mm 1980 Stock Photo
Features a discreet safety, magazine release (right side, left side, "AK" style), bolt release and charging handle, plus the ability to change which side cartridges are ejected from, a quick-change barrel that can be removed and replaced in seconds without—some tools , Picatinny rails and a folding telescopic buttstock.
The lightweight barrel is chromed and hammer-forged at the Beretta factory in Gardone Val Trompia, Lombardy. This rifle has a barrel length of 16 inches (40.6 cm) for the standard barrel and 12 inches (30.48 cm) for the special operators. The flame arrester has 5 radial cuts and 4 smaller ones to control muzzle rise during automatic firing. The barrel has a rotation ratio of 1: 7 for firing standard NATO tracer bullets and cartridges. The non-floating barrel can be easily removed by pulling the sliding levers in and pulling it out. The bayonet lug was developed by Beretta in collaboration with Extrema Ratio for the Extrema Ratio E.I. The bayonet is located above the barrel, not below it.
On the ARX160 A3, however, the bayonet lug is moved below the barrel, and it omits the signature bayonet lug design designed to mount an Extrema Ratio Fulcrum E.I. Bayonet for an updated bayonet lug compatible with the M9 bayonet. On the ARX160 A3 issued to the Italian Army, the extreme fulcrum was the E.I. The bayonet has been replaced with an FKMD Oplita bayonet.
The newly designed bayonet on the ARX160 A3 is also compatible with existing Extrema Ratio Fulcrum Ranger bayonets, which have always been the standard bayonets for alpine paratroopers. Thus, it eliminates the need to go for Extrema Ratio Fulcrum E.I. pikes
Italian Beretta Arx160 Assault Rifle Spotted In Use By Russian Commandos
The ARX160's operating system is unique in that the piston moves approximately 2 inches (50.8 mm), while other systems move fractions of an inch. The piston follows the bolt carrier nearly rearward, resulting in lower gas pressure and a less abrupt, more consistent shock to the frame.
It has the ability to eject empty shells from the right or left side for uncompressed operation. The bolt has lugs and an extractor on the left and right, without an ejector. The extractors are spring-loaded, and the way to eject the cases is selected by pushing the case through a small hole located behind the port. It is small and optimized for lead tip positioning. The ejection hole is located on either side and directs projectiles at a 45-degree angle from the barrel. The cocking lever is located on the bolt carrier and can be positioned on either side by pulling it out, passing it through the ejection port and pushing it into place.
It has stock sights made from the same polymer as the receiver of the weapon. The front sight is adjustable for windage and angle, and the rear sight has six positions for firing in increments from 100 to 600 meters. The main optical sight is Aimpoint ACIES, which is a local version of Aimpoint CompM2. Telescopic sights, night vision systems, vertical front grips and other accessories will be available through the Soldato Futuro software.
ARX160 A2 with ACOG sight, folded stock and bolt in full front position
Beretta Mx4 Storm
ARX160 A3 with extended Picatinny rail, equipped with updated grips that have improved heat dissipation
The Beretta ARX160 can be chambered in 5.56×45mm NATO or 7.62×39mm. It has a Picatinny rail at the top of the receiver, as well as at the 3, 6, and 9 positions of the grip for attaching various optics, grips, and other accessories. It should be noted that the Picatinny rail located at the 6 o’clock position is limited, as Beretta offers a Picatinny rail extender attachment to mitigate this. It features a quick-change barrel, 12- and 16-inch barrel lengths, folding sight, ambidextrous fire/safety switch, magazine release handle, bolt release and loading, and a case ejector that can eject brass blanks to the right or left by pressing into the case ejection selector with tip 5.56×45mm NATO cartridge and a telescoping folding stock that is also adjustable for length of pull. A conversion kit for the 7.62×39mm is also available, which requires changing the barrel, bolt, lower receiver assembly and magazine to change the caliber. AKM magazines are used in the 7.62×39mm configuration and STANAG magazines in the 5.56×45mm NATO configuration.
It uses a patented bayonet lug that extends above the barrel from the gas block and is compatible with Extrema Ratio Fulcrum E.I. bayonet.
The Beretta ARX160 A2, also known as the ARX160 SF (Special Forces), is similar to the ARX160 but has a shorter stock, an extended Picatinny rail on the bottom of the grip, and uses a 12-inch barrel. It was developed for the Italian Special Forces and later adopted
Beretta Arx100 5.56mm
Shoot machine guns vegas, stream machine water guns, where is beretta guns made, who makes beretta guns, toy machine guns, machine guns las vegas, nerf guns machine guns, realistic toy machine guns, beretta trap guns, machine guns, toy guns beretta, machine guns vegas
0 Comments